1.8KW Water-Cooled High-Pressure Electric Scuba Diving Air Compressor Pump
$ 121.47
Description
30MPA High Pressure Electric Air Compressor Scuba Diving Pump Water-Cooled 110V The oil-water filter is bigger and the filtering effect is better Directly inflate the diving cylinder without air filter Water-cooled submersible breathing high-peable diving cylinder, with activated carbon filter, pure output. 110V Electric Air Compressor Diving Pump 30MPA Specifications: Voltage: 110-130v, 60Hz Rated power:1.8kw Motor speed: 2800r / min Working noise: 70dB Air output: 130L / min Cooling mode: water cooling Compression level: secondary compression Lubrication method: splash type Motor material: all copper coil Cylinder head material: cast aluminum Shell material: Steel Pressure range: 0-40MPa Working pressure: 0-30mpa (4500psi) Maximum temperature: 80 ℃ Connector type: 8mm quick connect female Package size: 49 * 28.5 * 43cm Total weight: 20.5kgs Note: Oil: add piston type air compressor oil (the machine has no oil, because it is not allowed to carry oil by air) Speed test: it takes 3 minutes for 0.5L oxygen cylinder to inflate 30MPa, 6 minutes for 1L oxygen cylinder to inflate 30MPa, and 40 minutes for 6.8L oxygen cylinder to inflate 30MPa. Operation Method of Electric Air Pump: 1.Check the amount of oil before each use, the oil should exceed the red dot, but not too much. The Lubricating oil that is exported to foreign countries is taken out and needs to be added by itself. 2.Replace the breathing plug. Change the oil cover used for transportation to a strip-shaped breathing plug. 3.Loosen the air bleed screws on both sides before starting the machine(Remember, the machine needs to start under zero pressure. If the bleeder screw is not loosened, the machine will not start. After starting the machine, tighten the bleed screws on both sides to press normally After the end of the inflation, loosen the deflated screw and then deflate, then take the inflation joint). 4.To install the water pump, you need to put the water pump into the water. The more cold water, the better. After the water pump is normally circulated, the electric air pump can be turned on Manually shut down after reaching the required pressure,the whole process needs attention, and it is forbidden to leave. Packing List: 1 x set of 30MPa high pressure air pump 1 x water pump 2 x water pipes 1 x filter 1 x spring hose 2 x pressure relief screws 1 x tank breather plug 1 x shock pad 1 x This manual Warm reminder:The manual in the package is a universal version, if you need any help after receiving it, please contact the seller directly.
This electric air compressor is a game-changer for scuba diving! The powerful 1.8KW motor delivers 30MPA pressure effortlessly, and the water-cooling system keeps it running smoothly. I love the oversized oil-water filter for cleaner air and the fact it fills tanks directly without extra equipment. Super quiet at just 70dB, it pumps 130L/min—perfect for quick refills. The activated carbon filter ensures pure, breathable air every time. Highly recommend for serious divers who want reliable, high-performance gear!