25W 3000LM Motion Sensor Security Light with Remote 5000K Daylight IP65 Waterproof
$ 63.91
Description
Upgraded remote control: This security light comes with a remote control for easy operation, allowing you to turn the light on/off, set timing, and change modes. The remote control has a sensing distance of over 30 meters, reducing the need to climb ladders for adjustments 4 Modes Control: In addition to the AUTO Motion Sensor Mode, this light offers three other modes to meet different lighting needs. The Dusk to Dawn Mode automatically turns on at dusk and off at dawn, the On-Time Mode allows manual control, and the Test Mode detects ambient motion for a brief illumination Motion Sensor: This security light features a motion sensor that can detect movement up to 72 feet away at a 320° angle, keeping your home secure 24/7. The lighting time is adjustable from 10 seconds to 10 minutes, and the light can be easily installed for soffit/eave or wall mounting IP65 Weatherproof: Crafted from high-quality PC, this flood light is resistant to ultraviolet rays, flames, and corrosion compared to other materials like PPE and ABS. The weatherproof design ensures stable operation in various weather conditions, making it an ideal lighting solution for outdoor spaces LUX: control knob for brightness sensitivity. The LUX switch was designed to set the brightness value for the sensor. If the ambient brightness is higher than your setting, it’s defined as “daytime” and the light doesn’t turn on; if the brightness is lower than your setting it is defined as “night” and your light will turn on Quality and Guarantees: ETL certificated, it brings extra safety to your home; a 5-year protection plan for support. Your satisfaction is all we want. Please contact our team on Amazon Message if you have any problems Product Description 1 AUTO MODE 2 D2D MODE 3 ON-TIME MODE 4 TEST MODE REMOTE CONTROL Control on/off Control time Control mode Easy use Can this light both be eave mounted and wall mounted? Yes. This light is applicable to both eave mounted and wall mounted. For the detailed installation instructions, you can find in the manual book. Why does this light turn on in daytime in Auto/D2D mode? Step1: Make sure you have set the light in Auto/D2D mode not in other mode. Step2: Check the LUX setting. If the LUX is higher than installation environment, it will turn on when it is detected in daytime. You should lower the LUX setting. Why does this light turn on and off continuously in Auto/D2D mode at night? Step1: Check the LUX setting. If the LUX is very low, it will turn on and off when it is detected at night. You should higher the LUX Step2: Make sure the brightness sensor is faced down and will not be influenced by other bright light source
