2L Billet High Flow Swirl Fuel Surge Tank AN6 Fitting & 044 External Fuel Pump
$ 32.21
Description
2L Billet High Flow Swirl Fuel Surge Tank AN6 Fitting & 044 External Fuel Pump Item Description 2L Fuel Surge Pot Tank AN6 【Fitting 】 Robotically TIG welded -This 2L Brand New Aluminum Fuel Surge Tank for use with SINGLE Fuel Pumps. 【Features】Simple straight forward install, no welding, no sumping, no mounting fuel lines and pumps underneath the car. Eliminates the need for long lengths of braided line from the front to back of the car. You should be able to install - - this fuel tank in the engine bay and use less than 8' of fuel line in most applications. Fuel pumps are constantly submerged in fuel leading to quieter operation and longer life for the fuel pump. Our surge tanks are anodized for protection against more corrosive fuels. (E85 and Methanol Ready) Perfect for installs where a plastic tank exists from the factory and there is no option to sump. 100% Brand New Material : Raw Aluminum Capacity : 2 Litre Length: 149.50mm Width : 148.50m Height : 149.50mm Diameter: 61mm 300LPH High Pressure Fuel Pump 【ELECTRIC FUEL PUMP KIT MATERIAL】 External fuel pump is made of high-density copper and iron that is high hardness, not easy to wear, not easy to corrode, and has a long service life. 【COMPATIBLE FUEL 】 Inline Fuel Pump Inlet AN10, Outlet AN 6, Pump Flow and Test Information: Flow Rate: 200 LPH(53 GPH) under 75PSI(5.0 Bar) & 12V. Flow rate:255 LPH(68 GPH) under 43 PSI(3.0 bar) &12V. Flow rate:300 LPH(80 GPH) under 43 PSI(3.0 bar) &13.5V. Operating Voltage:12V. Operating Pressure:75PSI(5.0Bar). Operating temperature range: -68 °F-194 °F 【EASY TO INSTALL 】 It is recommended to install below the tank ensures that fuel is gravity-fed from the fuel tank. If the pump is higher than the fuel tank, it is forbidden to flow to the pump and force the fuel to be scratched. If the pump is higher than your fuel tank, prohibit fuel flow to the pump and force fuel to enter the pump. 【COMPATIBLE FUEL 】 Gasoline, pump gas, race gas, diesel, (Alcohol fuels or E85 can be used, but pump life will be diminished). This Inline High Pressure Fuel Pump is adopts the anodized surface process, which is not easy to fade and has rust proof, scratch proof and waterproof. FAQ: I purchased by mistake, how do I cancel the order? Please contact us ASAP. If the item has not been shipped out we can cancel the order for you. If the item was shipped out you can refuse the package and wait for the item to return to us. I received your item but it does not fit or is defective Please contact us so we can assist you on the matter. Buy with confidence Our quality is based on meeting the requirements of the manufacturer and improvement them in design problems manufacture. NOTE: (1)It would be highly appreciated if you might contact us first once you have any problems concerning the items. And you can expect all the issues would be resolved ASAP! (2)Please let us know before you send us the neutral/negative feedback that wont help to finish the issues. And I will definitely try my best to provide the best solutions which would meet our satisfactory! (3)According to the distance of the receipt address items would be sent from CA or NJ
As listed, would purchase again!