Cigar Box Guitar Fretting Miter Box Kit
$ 9.49
Description
Finally, a low-cost, professional solution to achieving nice, straight fret slots! This miter box kit was designed by Ben "" Baker specifically to make it easy to cut nice, straight slots in your 1 1/2" wide cigar box guitar necks and fretboards! It was designed specifically to work with our own fretting saw, but you can use it with other thin-kerf saws as well.; This miter box is laser-cut from 1/4" birch plywood and will stand up to long use if treated with care.; Openings on the sides allow you to see how deep of a slot you have cut. This miter box comes as a 3-piece kit, simply insert the tabs on the side pieces into the holes in the base piece, squirt in a little glue, and you're good to go.; mounting holes for screwing the miter box to a workbench or larger board are also included. This miter box is designed specifically to work with 3/4" thick necks and 1/4" thick fretboards that are 1 1/2" wide or narrower (the most popular size used on cigar box guitars). It will not work with any neck/fretboard over 1 1/2" in width. It can handle stock up to about 1 1/8" thick, though the slot depth windows don't extend up that far.; Listing photos that show the fretting saw are for reference Only. Low-cost solution for straight fret slots Perfect for fretting Cigar Box Guitars Easy to Assemble Designed for thin-kerf saws (not included) For necks up to 1 1/2" wide
