Silicone Hose 3 Inch 90° Degree Reducer Pipe Coupler Black
$ 5.38
Description
Silicone Hose 3 Inch 90° Degree Reducer Pipe Coupler Black 🔧 90-Degree Elbow Silicone Hose (3" ID x 4" Length) – High-Temp Turbo/Intake Piping 🔧 【4-Ply Nylon Reinforced + -76°F to 500°F Tolerance】With Stainless Steel Clamps – Universal for Turbo/Intake Systems (Black-Red Color) 1. Core Features 🔹 Precision Dimensions for Turbo/Intake Piping Designed to fit standard 3-inch diameter turbochargers, intercoolers, or intake manifolds – a critical component for custom or replacement air/water flow systems: Inner Diameter (ID) : 3 inches (76mm) – matches most aftermarket turbo and intake piping sizes. Length : 4 inches (102mm) – ideal for 90-degree bends in tight engine bays (avoids kinking or restricting airflow). Size Tolerance : ±0.5mm – ensures a snug, leak-free fit with 3-inch piping (no gaps that cause pressure loss). 🔹 Extreme Temperature & Pressure Resistance Built to handle the harsh conditions of turbocharged or high-performance engines: Working Temperature Range : -76°F (-60°C) to 500°F (260°C) – withstands cold starts in winter and extreme underhood heat from turbos (outperforms rubber hoses that crack at 250°F+). Pressure Ratings : Working Pressure: 43.5–130.5 PSI (0.3–0.9 Mpa) – safe for forced-induction setups (turbo/supercharger boost pressure). Burst Pressure: 2 Mpa (290 PSI) – prevents catastrophic failure even under pressure spikes. Material Stability : Resists UV rays, water, ozone, and oxygen – no degradation from outdoor exposure or engine bay chemicals (maintains flexibility for years). 🔹 Durable 4-Ply Nylon Reinforced Silicone Outlasts standard single-ply silicone hoses with heavy-duty construction: 4-ply nylon reinforcement : Adds structural strength to prevent ballooning (expansion under pressure) and tearing – critical for turbo systems where airflow pressure fluctuates. High-quality silicone core : 5mm (0.2-inch) thickness balances flexibility and durability – easy to install around engine components, yet rigid enough to hold shape. Black-Red color scheme : Adds a sporty, performance-focused look to your engine bay (complements aftermarket turbo/intake parts). 🔹 Universal Fit for Turbo/Intake Systems Versatile enough for multiple high-performance applications: Primary Use : Connecting turbo piping (turbo to intercooler, intercooler to throttle body) or intake piping (air filter to throttle body). Not for Oil/Fuel : Critical note – this hose is not suitable for oil or fuel transfer (silicone is incompatible with petroleum-based fluids and will degrade, causing leaks). 2. Technical Specifications Parameter Category Detailed Specifications Condition 100% Brand New Product Type 90-Degree Elbow Silicone Hose (for turbo/intake systems) Material Silicone core + 4-ply nylon reinforcement; Color: Black-Red Dimensions Inner Diameter (ID): 3" (76mm); Length: 4" (102mm); Thickness: 5mm (0.2"); Size Tolerance: ±0.5mm Temperature Range -76°F (-60°C) to 500°F (260°C) Pressure Ratings Working: 43.5–130.5 PSI (0.3–0.9 Mpa); Burst: 2 Mpa (290 PSI) Compatibility Universal for 3" turbo/intake piping; Not for oil/fuel Included Hardware 2 × Stainless Steel Clamps (for secure attachment to piping) Warranty Not explicitly listed (standard for similar parts: 30–90 days) 3. Package Included 1 × 90-Degree Elbow Silicone Hose (3" ID × 4" Length, Black-Red) 2 × Stainless Steel Clamps (for mounting to piping) (All components as shown in product images) 4. Installation Tips Prepare Piping : Ensure the 3-inch turbo/intake piping is clean and free of oil/debris (silicone hoses bond best to clean surfaces). Slide on Clamps : Place the included stainless steel clamps over the ends of the piping before attaching the hose. Attach the Hose : Slide the hose’s 90-degree ends onto the piping – push firmly to ensure a full seal (the hose should cover 1–1.5 inches of the piping). Tighten Clamps : Position the clamps over the hose-piping junction (not on the hose’s bend) and tighten with a screwdriver/wrench – avoid over-tightening (this can damage the silicone). Test for Leaks : After installation, start the engine (or use a boost leak tester for turbo systems) to check for air leaks – re-tighten clamps if needed. 5. Important Notes Compatibility & Usage Piping Size : Confirm your turbo/intake piping is 3 inches (76mm) ID – the hose will not fit 2.5" or 3.5" piping (use an adapter if needed). No Oil/Fuel : Never use this hose for oil cooler lines, fuel lines, or any petroleum-based fluid transfer – this will cause the silicone to break down and leak. Shipping & Support Fast Dispatch : Ships from NJ/CA/GA/TN warehouses via USPS/UPS/FedEx/DHL – delivery takes 2–7 business days (excludes weekends). For urgent orders, contact the seller before purchasing. No Puerto Rico Shipping : The item will not be shipped to Puerto Rico – confirm your address before ordering. Issue Resolution : For fitment problems (e.g., hose is too small/large), damage, or questions: Contact the seller first (before leaving feedback). Provide photos of your piping and the issue. The seller will resolve within 24 hours (send replacements, offer refunds, or provide guidance). Measurement & Color Manual measurement may cause 1–3mm differences in length/ID – this does not affect performance if your piping is 3" ID. The Black-Red color may vary slightly due to display/lighting – the actual product matches standard aftermarket silicone hose color schemes. Upgrade your turbo or intake system with this high-temp, durable silicone hose – perfect for performance builds, race cars, or daily drivers with forced induction! 🚀
